
EVANS NON-GLYCOL ‘TRACKWATER’ COOLANT 1.89L
TrackWater is a high performance corrosion protected deionized inhibited water with surfactant. TrackWater is recommended for pavement track machines that are not allowed to use glycol based coolants. No mixing is required, does not offer freeze protection.
NON-GLYCOL
‘TRACKWATER’ COOLANT
| READY TO USE
Instructions:
• Drain cooling system as per vehicle instructions including expansion tank. Dispose of old coolant in
accordance with applicable laws and regulations.
• Flush system with water to remove remaining coolant. Trackwater is compatible with antifreeze materials,
but residual antifreeze may result in a green tint visible at tech inspection.
• Fill system with Trackwater as per vehicle instructions. Run machine, revving moderately to purge
potential air pockets.
• Check fluid level at the radiator. Fill expansion tank to “cold” level line.
Good to Know:
• The additives in Trackwater will protect engine components from contaminants in the water that may
have been introduced during the step 2 flushing.
• Trackwater will freeze at 32F/OC. Water expands when frozen and engine component damage will be
encountered.
• Trackwater should be replaced within one year of installation. Do not store machine with Trackwater if
freezing temperatures are possible. Magnesium is especially reactive to water, avoid long term contact.
• If the temperature of Trackwater exceeds its boiling point (212F/100C at atmospheric pressure, 240F/120C
under 15 PSI) the vapor formed will push the liquid out of the cooling passages allowing the metal
temperatures to spike.