This is the next generation of gear shift support, as an assembly design the gear arm is also replaced, compared to our other types of shift supports we do the Ducati version is more complex and more parts. The gear arm sits on the bearing and is the new gear arm that you mount your gear linkage arm to.

Be sure when fitting, the gear arm has full actuation with no touching of the quick shifter module on the gear linkage rod.


Have you ever been in a situation where you’re screaming through some twisties when suddenly you hit a false neutral and so you have no drive or engine breaking, This can be extremely dangerous.

What are miss shifts / false neutrals? false neutral’s are where the transmission does not engage the gears properly especially when shifting through higher gears like from 2th to 3th or 4th to 5th. This can be very frustrating when your in the moment ready for the next corner when you hit 6th and BAM you hit that unwanted false neutral.
dangerous if one doesn’t know how to handle the situation properly too.

The gear shift linkage is a common cause of this, feel your linkage, it has a lot of play and the Gear shaft also has lateral movement.

The Racetorx Gear shift support stiffens up the lateral movement in the gear shaft which then also reduces the slop in the gear shift linkage and so helps prevent miss shifts altogether and provides positive gear changes.

In addition, The gear shift support also supports the shaft from snapping for one example, triumph 675 and 765’s have an E-clip groove after the seal on the gear shaft,
this is a prone location to snap. The gear shift support reduces the force on the machined e-clip grove which in turn helps save you from the costly engine repairs.

Don’t take our word for it. check out our Trust pilot reviews.

Stop the missed shifts and false neutrals while adding some protection to your transmission with our one of a kind gear shift supports. Don’t settle for knock-offs and inferior products, our gear shift supports are second to none.


Included– Gear shift assembly, this includes the bearing and housing, gear arm, spacers and all hardware.

Material- 6061-T6 aluminium

Aesthetically pleasing with hard anodizing for corrosion protection.

Anodizing – Hard anodizing in Black.


Make Model

  • Ducati – 899 Panigale 2014-2018
  • Ducati – 959 Panigale 2016-2019
  • Ducati – 959 Panigale Corse 2018-2019
  • Ducati – 1199 Panigale 2012-2014
  • Ducati – 1199 Panigale R 2013-2014
  • Ducati – 1199 Panigale S 2012-2014
  • Ducati – Ducati Corse 1199_RS Panigale WSBK
  • Ducati – 1299 Superleggera 2017
  • Ducati – Panigale 1299 2015-2017
  • Ducati – Panigale 1299 S 2015-2017
  • Ducati – Panigale 1299 R 2015-2017
  • Ducati – Panigale 1299R Final Edition 2018

Tips in fitting, The gear arm bolt is restricted by the clutch master cylinder bleed nipple, actuate the gear arm then carefully lock the gear arm in place to unscrew the bolt. this must be done carefully as to not scratch the engine, please be sure to have a competent person fit this kit.